The 4th generation SF3015H high power fiber laser cutter is mainly designed for high power :6kw to 20kw, it is with full-protection cover, which can prevent the laser radiation and protect the worker safety, reduce the environment pollution; and it is also with auto-exchangeable platforms, which can save the materials loading time, improve the processing efficiency. The exchange platform only takes 20 seconds to complete the exchange. The SF3015H4 high power laser cutter has passed CE/FDA /ETL certifications, which is in line with European and American standards.
Technical Parameters of The Fourth Generation SF3015H Fiber Laser Cutter
Laser Power :6KW/8KW/10kW/12KW/20KW
Work Area :3000*1500mm/9.84*4.92ft
X-axis Travel :1530mm/5ft
Y-axis Travel :3050mm/10ft
Z-axis Travel :390mm/1.27ft
Positioning Accuracy :±0.05mm
Repeated Positioning :±0.02mm
Maximum Speed :180m/min
Maximum Acceleration :2.0G
Table Maximum Load(KG) :1400
Power Parameters :Three-phase AC 380V 50Hz
Protection Level of Total Power Supply :IP54
Cutting material and thickness in millimeters (mm)
Cutting material and thickness in inches (inch)
Main Configuration of The Fourth Generation SF3015H
1.Heavy-duty thermally isolated hollow bed
The heavy-duty thermally isolated hollow bed is welded with high-quality steel plates and pipes. After welding, stress relief annealing, secondary aging treatment, and ultra-large gantry milling machine precision processing ensure that the bed has sufficient structural stability and shock resistance. Withstand higher acceleration. There is no connection inside the bed to block heat transfer, avoiding the heat generated by cutting from being transferred to the bed and affecting the processing accuracy. The bed will not be deformed after long-term use, which improves the service life of the equipment.
2.Intelligent surrounding spiral negative pressure dust removal
Intelligent surrounding spiral negative pressure partition dust removal system, according to the current cutting position, intelligently switch the air outlet, time-sharing, partition, and sectional air exhaust, and cooperate with the back-shaped sealing structure design at the bottom of the base to realize smokeless cutting.
3. Gaphite, copper protection(≥8000w)
The thermal conductivity of graphite is poor, which effectively prevents the machine bed from being deformed by heat and guarantees the service life.
4.Strong Aviation Aluminum Beam
The use of aviation-grade high-strength aluminum alloy beams, light weight, low inertia; built-in triangular reinforced structure, strong rigidity, good shock absorption; rough machining after annealing to eliminate internal stress, and fine machining after secondary vibration aging treatment to ensure Improve the overall strength and stability of the beam.
What’s the Industry Application of The Fourth Generation SF3015H Fiber Laser Cutter
The SF3015H4 fiber laser cutting machine is specialized for sheet metal processing, machinery manufacturing, auto parts manufacturing, electrical manufacturing, elevator manufacturing, petroleum machinery, food machinery, shipbuilding etc.
What does the SF3015H4 High Power Fiber Laser Cutter cut?
Carbon steel, stainless steel, aluminum alloy, brass, copper, galvanized sheet, silicon steel sheet, electrolytic sheet, titanium alloy, manganese alloy, etc.
Five Star Fast Service System
- 24 hours a day (mainly for international), 7 days a week, 365 days a year at any time to receive repair calls;
- Within 10 minutes, technical engineers will consult, fix maintenance plan in one hour, and send engineers in one working day.
- The seller provides one time free installation and training in buyer’s factory. Seller pays for the airplane tickets and salary for engineers, buyer should provide accommodation and food to engineers.
- The seller will provide technical guide’s e-mail, telephone, WeChat, WhatsApp and so on.
- The seller should pay for the travel expense if local service needed within warranty time.
- The warranty of laser source is 2 years.
- The warranty of the machine is 2 years（main spare parts）,except for the consumable parts such as ceramic ring, focus lens, nozzle etc. Warranty counts from the date marked on the label of the laser source and machine.
- Except the damage artificially, seller is responsible for offering the fittings free of charge during the warranty period.
- Pre-sale service: theoretical + practical operation training, self-diagnosis training for common faults, guidance for quick repair of difficult faults, and warning of matters needing attention in use;
- Regular service: regular maintenance reminder, regular door-to-door service, regular promotional activities;
- Value-added services: equipment software and hardware upgrading services, financial leasing services, delayed warranty service.
Our branches in United States,Germany, India,Pakistan,Serbia provide localized services and technical support for global customers.
For more details, welcome to contact us! CLICK HERE!
Our North American Tech/Demo Center is located in the Los Angeles Industrial Region, conveniently near the Port of LA.
1) Equipped with showroom, sales manager, engineers and machine.
2) Price, stateside Tech-Support, Components, Capabilities, and Warranty that is likewise protected under USA Trade Law, as most of our competitors do not have USA Legal or Tech presence as we do.
PRE SALE SERVICE
1) Provide corresponding guidance and equipment information according to customer’s development needs;
2) Solve problems based on the feasibility and development requirements of local market;
3) Provide large-scale optical fiber equipment exhibition hall for customers to confirm the strength of our company.
1) The seller provides one-time free installation and training service at buyer’s factory, as well as the airplane tickets and salary for engineers. The buyer should provide accommodation and food to engineers.
2) The seller provides technical guide’s e-mail, telephone, Wechat, Whatsapp and so on.
3) The seller shall pay for the travel expense if local service needed within warranty time.
SENFENG LEIMING LASER is a professional sheet metal fiber laser cutter manufacturer engaged in the research, development, production, sale and service of fiber laser cutting machine, fiber laser cleaning machine, laser marking machine, laser welding machine and 3D robot. Our laser cutting machine has successfully passed CE from TUV, FDA, ETL, ISO9001-2015 certification. SENFENG LEIMING LASER has 4 standardized laser equipment manufacturing bases with a total area of over 120,000 square meters. We have established many branches in Germany, the United States, India, and Pakistan, providing local service for customers.